Milwaukee M12 cordless high visibility class 3 lime heated jacket. Fleece inner liner and durable carbon fiber heating elemnts in chest, upper back, and lower pockets. Features 3 settings for varying heats (high medium, low) that are indicated by inner lapel switch. Jacket is water and wind resistant, and has back tag patch for hunter ID tags. Powered by M12 red lithium ion battery (included) for up to 6 hours of heat on a single charge. Battery is conveniently hidden in a sleek back pocket that expands to hold XC battery. 100% polyester, 2 lower pockets, and 1 chest pocket. Battery for jacket charges in 30 minutes on charger that is included.

Features:

• Cored heat zones provides heat to chest and upper back while pocket heat zone provides heat to hands.
• 3 heat settings per zone (high, medium, low)
• Water and wind resistant
• Up to 6 hours of continuous heat per battery charge
• Easy touch heat controller on lapel 
• Zip-in removable hood
• Specific fabric blend to reduce noise during movement
• Durable back tag patch to visually display back tag license
• Hidden inside pocket to facilitate easy custom embroidery

Includes:

• M12 cordless lime heated jacket
• M12 red lithium compact battery (12V)
• M12 lithium  ion charger

Economical high visibility lime jacket with fixed quilted liner, PU coated polyster with fully taped seam and concealed attached hood. Outside slash pockets and cell phone pocket, elastic ribbed waist, wrist and collar, 100% waterproof. ASNSI/ISEA 107 approved.

 High visibility orange bomber jacket with PU coated polyester and fully taped seams, removable fleece liner, waterproof, concealed detachable hood, elastic ribbed waist, wrist, and collar, inside breast pocket and outside slash pockets, and cell phone pocket. Meets ANSI/ISEA 107-2004 Class 3 standards. 

High visibility lime Maxx-On parka with 300D waterproof breathable oxford fabric, outer pockets with storm flaps, side slash insulated pockets, 2" silver reflective stripes, concealed adjustable hood, elastic wrist with velcro closure, zipper storm flad with heavy duty snaps, stitched and taped seams, vented mesh back, harness D-ring pass through with storm flap, inside pocket with zipper closure, mic tabs on each chest, side zippers for added comfort. 

Ability to zip in Class 3 fleece liner (75-5381). Sold separately.

*Meets ANSI/ISEA 107-2010 class 3 standards

High visibility lime Maxx-On parka with 300D waterproof breathable oxford fabric, outer pockets with storm flaps, side slash insulated pockets, 2" silver reflective stripes, concealed adjustable hood, elastic wrist with velcro closure, zipper storm flad with heavy duty snaps, stitched and taped seams, vented mesh back, harness D-ring pass through with storm flap, inside pocket with zipper closure, mic tabs on each chest, side zippers for added comfort. 

Ability to zip in Class 3 fleece liner (75-5381). Sold separately.

*Meets ANSI/ISEA 107-2010 class 3 standards

High visbility lime jacket with black on bottom portion. Jacket has PU coated polyester outer shell with fully taped seams and sealed, detachable hood. Jacket also has elastic ribbed waist, wrist, and collar, inside breast and outside slash pockets, cell phone pocket, and removable fleece liner. 

*Meets ANSI/ISEA 107-2010 Class 3 standard

High visibility lime rain jacket with 100% polyester, PU coated oxford fabric, fully taped seams, two outer pockets and hood, unlined.

*Meets ANSI/ISEA 107-2010 Class 3 standard.

High visibility orange rain jacket with 100% polyester, PU coated oxford fabric, fully taped seams, two outer pockets and hood, unlined.

*Meets ANSI/ISEA 107-2010 Class 3 standard.

Transformer (8 in 1) Jacket, High Visibility, Waterproof and cold resistant, Majestic high visibilty 
 
 Transformer (8 in 1) Bomber Jacket

High Visibility Yellow and Striping

PU coated polyester shell

Removable high visibility ANSI Class 3 Liner

Concealed detachable hood, works with both jacket and liner

Elastic ribbed waist and wrist

Warm fleece collar

Inside breast pocket

Zipper slash pockets

Cell phone pocket

Heavy dutty zipper

ANSI 107-2010 Class 3 compliant

Clear I.D. holder pocket

Pen/Pencil sleeve pocket

Removable sleeves on both liner and jacket

Fully Lined sleeves

Radio/Handset chest straps
 
 

Transformer (8 in 1) Jacket, High Visibility, Waterproof and cold resistant, Majestic high visibilty 
 
 1 Transformer (8 in 1) Bomber Jacket

High Visibility Orange and Striping

PU coated polyester shell

Removable high visibility ANSI Class 3 Liner

Concealed detachable hood, works with both jacket and liner

Elastic ribbed waist and wrist

Warm fleece collar

Inside breast pocket

Zipper slash pockets

Cell phone pocket

Heavy dutty zipper

ANSI 107-2010 Class 3 compliant

Clear I.D. holder pocket

Pen/Pencil sleeve pocket

Removable sleeves on both liner and jacket

Fully Lined sleeves

Radio/Handset chest straps
 

High visibility lime DOT rain jacket. Polyester with breathable, stretchable polyurethance coating, double welded waterproof seams, outer pockets with snap closure storm flaps, zipper closure with snap closure storm flap, concealed hood with zipper closure, 3M Scotchlite™ striping on contrasting orange DOT striping. Unlined jacket with elastc wrists and pull string wasit superior fit. 

*Meets ANSI/ISEA 107-2010 Class 3 standards

ANSI/ISEA 107 Class 3 compliant ICON jacket. Fluorescent yellow-green background material for easy visibility. 2" silver reflective tape.

Comfort-Brite fluorescent lime jacket with attached hood. 2" silver reflective tape. Flame resistant rested ASTM D6413. Therm-O-Rad sealed seams, waterproof, zipper/storm fly front, roll-a-way hood, full vented cape back, D-ring access for fall protection harness, suspenders with quick release buckles and cross over, cargo pockets with closure, velcro take-up straps on sleeves, mildew resistant. Chemical resistant against many acids, oils, alcohols, salts, and alkalies.

Comfort-Tuff 48" yellow coat, includes splash pockets, hood snaps with detachable hood. Waterproof protection thanks to Therm-O-Rad sealed seams. Storm fly front, non-conductive, non-corrosive hardware.

ANSI/ISEA 107 Class 3 compliant 7 Mil polyurethane on 150 denier woven polyester jacket with 2" silver reflective tape, hood and collar, 2 pockets, waterproof, storm fly front, non-conductive, non corrosive hardware, roll-away hood, cargo pockets with velcro closure, suspenders with quick release buckles and crossovers, mildew resistant.

ANSI/ISEA 107 Class 3 compliant lime mesh/laffeta lined jacket, 2" silver reflective tape, zipper/storm fly front with throat guard, roll-away adjustable hood in collar, elastic cuffs with hook and loop take-up straps, 2 patch pockets, 2 hand warmer pockets, front radio pocket, inner breast pocket, full vented cape back with fall protection access.

ANSI/ISEA 107 Class 3 compliant orange mesh/laffeta lined jacket, 2" silver reflective tape, zipper/storm fly front with throat guard, roll-away, adjustable hood in collar, elastic cuffs with hook and loop take-up straps, 2 patch pockets, 2 hand warmer pockets, front radio pocket, inner breast pocket, full vented cape back with fall proctecion access.

ANSI/ISEA 107 Class 3 compliant fluorescent lime jacket, 3-in-1 multi-layer system, removable fleece liner, 2" silver reflective tape, waterproof, mesh/taffeta lining, zipper/storm fly front with throat guards, roll-away adjustable hood, full vented cape back, D-ring access for fall protection harness, hand warmer side pockest with front cargo pockets adn velcro closure, front radio pocket, inner breast pocket with zipper closure, elastic cuffs. Inside lining is 300 gram insulated black fleece that zips in and out. Lining also has 2 slash pockets with zippers and elastic drawcords at the waist.

ANSI/ISEA Class 3 compliant fluorescent yellow-green Phase 3 jacket, athletic apparel design, inner fleece layer, breathable to ASTM E96, water resistant, breathble, insulating fabric, storm fly front and zipper front closure, front hand warm pockets with zipper closure, right breast security pocket with zipper closure, velcro take-up straps on sleeve cuffs, longer cut back with adjustable elastic draw cord, charcoal grey front. Phase 3 can be zipped into the Icon (J24122) outer shell for insulate.

High visibility lime bomber jacket that is 100% waterproof. Jacket has fleece body lining and quilted polyester sleeve lining, 300 denier polyester shell, 2" silver reflective tape, and 5 exterior and 3 interior pockets. Also includes storm fly front and zipper front closure, roll-a-way hood in collar, front hand warmer pockets with closure, left breast radio pocket with flap closure, heavy duty stretch knit cuffs and waist, dark colored front, stitched and taped seams, waterproof underarm zipper vents, and 2 mic tabs. 

*Meets ANSI/ISEA 107 Class 3 standard

High visibility lime bomber jacket that is 100% waterproof. Jacket has quilted polyester lining, 210 denier polyester shell, 2" silver reflective tape and includes storm fly front and zipper front closure, roll-a-way hood in collar, slash front pockets with closure, left breast radio pocket with flap closure, elasticized cuffs and waist, dark colored front, stitched and taped seams, and 2 mic tabs. 

*Meets ANSI/ISEA 107 Class 3 standard

High visibility orange bomber jacket that is 100% waterproof. Jacket has quilted polyester lining, 210 denier polyester shell, 2" silver reflective tape and includes storm fly front and zipper front closure, roll-a-way hood in collar, slash front pockets with closure, left breast pocket with flap closure, elasticized cuffs and waist, dark colored front, stitched and taped seams, and 2 mic tabs.

*Meets ANSI/ISEA 107 Class 3 standard

ANSI/ISEA 107 Class 3 compliant fluorescent yellow-green jacket, 2" silver glass bead reflective tape, zipper fly font, velcro take-ups, roll-away hood, 2 patch pockets, full vented cape back with fall protection access. Therm-O-Rad sealed seals keep jacket 100% waterproof. Non-conductive hardware, suspenders with quick release buckles and crossover, easy access cargo pockets, mildew resistant, flame resistant test. Chemically resistant against many acids, oils, alcohols, salts, and alkalies.

ANSI/ISEA 107 Class 3 compliant fluorescent orange jacket, 2" silver glass bead reflective tape, zipper fly font, velcro take-ups, roll-away hood, 2 patch pockets, full vented cape back with fall protection access. Therm-O-Rad sealed seals keep jacket 100% waterproof. Non-conductive hardware, suspenders with quick release buckles and crossover, easy access cargo pockets, mildew resistant, flame resistant test. Chemically resistant against many acids, oils, alcohols, salts, and alkalies.

 Tingley black, fleece jacket liner with two (2) splash pockets that have zippers and adjustable elastic drawcords. 300 gram insulating black fleece liner that can be zipped in and out of the Icon jacket.